Monitor Specifications - NARDA nardalert S3 Operating Manual

7 Specifications

7.1 Monitor specifications

38
Display Type
Display Size
Backlight
Display Refresh Rate
Memory
Storage Rate
Storage Time
Remote Operation
USB
Optical Interface
Recommended
Calibration Interval
Temperature Range
Humidity
Size (minimum)
Weight
Accessories
(included)
a
Only for basic instrument; sensors are specified separately
Nardalert S3
TFT Transmissive
1.77 inches, 28 x 35 mm, 128 x 160 pixels
White LEDs
250 msec.
62,000 events
4 per second, 1 per second, 1 per 5 seconds,
1 per 10 seconds, 1 per 20 seconds, 1 per 60 seconds
Variable - from 4.3 hours (4 per second),
to 43 Days (1 per 60 seconds)
Via USB or Optical RS-232 Interface
Serial, Full Duplex, 57600 baud (virtual com port),
multi-function plug connector
Serial, Full Duplex, 57600 baud, no parity, 1 start bit,
1 stop bit
a
4 years
Operational: -10°C to +50°C
Non-operational (transport): -30°C to +70°C
5 to 95% relative humidity, no condensation;
≤29 g/m³ absolute humidity (IEC 60721-3-2 class 7K2)
117.1 x 82.6 x 31.8 mm (4.61 x 3.25 x 1.25 in.)
0.5 lbs. (0.23 kg), with sensor
AC Charger with Plugs, Car (12VDC) Charger,
Charger/Data cable (USB), Carrying Case, Belt Clip,
Lanyard Clip, User's Guide, NS3-TS Software,
Calibration Certificate(s)
Narda