Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NARDA nardalert S3
Summary of Contents for NARDA nardalert S3
- Page 1 S3 Narda Broadband Monitor Operating Manual ®...
- Page 2 Phone: +49 (0) 7121-97 32-777 Fax: +49 (0) 7121-97 32-790 E-Mail: support@narda-sts.de www.narda-sts.de Italy Via Leonardo da Vinci, 21/23 20090 Segrate (MI) ITALY Phone: +39 02 26952421 Fax: +39 02 26952406 E-Mail: support@narda-sts.it www.narda-sts.it 43067900 Rev. A Nardalert S3 Narda...
-
Page 3: Table Of Contents
Strong fields ..........................12 Measurement errors .........................12 Sensor is not installed or operating properly ..............13 2.5 Dangers from AC mains charger .....................13 3 Preparing the Nardalert S3 for use .......................15 3.1 Unpacking ..............................15 Packaging .............................15 Items included ..........................16 Transport damage ........................17 After transport and storage ...................... - Page 4 5.2 Special environmental operations ....................28 Heavy rain or snow ........................28 High ELF environments ......................28 High RF/microwave environments ..................28 5.3 Using the Nardalert S3 as an area monitor ..................29 6 Instrument maintenance ..........................31 6.1 Cleaning the monitor ...........................31 6.2 Verification overview ...........................32 Simplified block diagram......................32...
- Page 5 7.4 Declaration of conformity ........................40 7.5 Declaration of origin ..........................41 8 Ordering information ...........................43 8.1 Nardalert S3 part numbers ........................43 8.2 Sensor part numbers..........................44 8.3 Nardalert S3 system part numbers ....................44 8.4 Optional accessories ..........................44 Warranty information ..........................45 Narda Nardalert S3...
- Page 6 Nardalert S3 Narda...
-
Page 7: Useful Information
Various authorities have long defined limit values designed to protect users from the dangers of exposure to such emissions, and the Nardalert S3 is an effective tool to help companies and individuals demonstrate compliance. 1.2 About this monitor The Nardalert S3 (“NS3”) provides virtually everyone concerned with this... -
Page 8: Applications
The NS3 performs measurements for human safety purposes, particularly in workplace environments where high electric or magnetic field strengths are likely. It can also be configured to function as a stand-alone area monitor with or without the Narda NBM-580 multiple-channel metering station. Examples: •... -
Page 9: About This Operating Manual
Structure of this Operating Manual This Operating Manual is divided into two main parts: 1. Using the Nardalert S3 You will find all you need to know about using the NS3 and how to deal with most measurement alarms in Chapters 5 through 7. -
Page 10: Structure Of Warnings
Open the MAIN menu. Cross reference (in PDF document only) Indicates a cross reference to another part of the Blue Type document. Click on the blue type in the PDF document to jump directly to the cross reference. Nardalert S3 Narda... -
Page 11: Safety Instructions
The NS3 is a warning device that gives active notice of the existence of dangerous fields by means of a visible and audible warning signal. Only use the instrument for the purpose and under the conditions for which it has been designed. Narda Nardalert S3... -
Page 12: Improper Use
If the instrument malfunctions, take it out of service and contact your Narda Service Center. The addresses are listed at the end of this Oper- ating Manual and on the Internet at www.narda-sts.com. -
Page 13: Sensor Is Not Installed Or Operating Properly
2-way radio that generates more than 1 Watt. An upscale indi- cation should be noticed on the display when the radio is transmitting close to the sensor housing. Narda offers portable sources to accom- plish this important test (see Optional Accessories on page 44). - Page 14 2 Safety instructions Nardalert S3 Narda...
-
Page 15: Preparing The Nardalert S3 For Use
Preparing the Nardalert S3 for use This chapter describes all you need to do before starting to use the Nardalert S3. Unpacking Instrument overview Connecting the sensor 3.1 Unpacking Packaging The packaging is designed to be re-used as long as it has not been damaged. -
Page 16: Items Included
Check that all the following items have been delivered: NS3 carrying case (P/N 11230500) Nardalert S3 (P/N 2270/01) Silicon sleeve (P/N 11229700, attached to Nardalert S3) Cable, USB “A” male to USB mini “B” male (P/N 70889004) Lanyard clip (P/N 11229312) -
Page 17: Transport Damage
Check the instrument and all accessories for damage when you have unpacked them. If the instrument is damaged, contact your Narda Service Center. The addresses of Narda Service Centers are listed in Chapter 6 of this Operating Manual and on the internet at www.narda-sts.com. After transport and storage... -
Page 18: Front Panel
3 Preparing the Nardalert S3 for use Front Panel Alarm LEDs Interchageable Sensor Rear Panel Calibration Label Sensor Removal Screws (2) Nardalert S3 Narda... -
Page 19: Side Panels
Section 3.2. Sensor is designed to be even with the surface of the basic unit and to pass a functional test at turn-on. If in doubt, cycle unit off and then on again Narda Nardalert S3... -
Page 20: Wrong Handling Of The Sensor
Ordering Information on page 43, as well as in the data sheets of the NS3. These documents can also be downloaded from the Narda website on the internet at: www.narda-sts.com. Wrong handling of the sensor Damage of the sensor antennas ... -
Page 21: Getting Started
Getting started This chapter describes how to switch on the Nardalert S3 and verify it is operating properly. Initial display screens Checking monitor functions Screen navigation Additional capabilities of optioned units 4.1 Initial display screens The NS3 is switched on by depressing and holding the On/Off button on the left side of the display. -
Page 22: Normal Operation
If only one alarm is used, then the color bar will change from Green to Red (Alarm). The wearer also receives audible, vibrate and LED visual indications when alarm thresholds are exceeded (factory defaults). Nardalert S3 Narda... -
Page 23: Checking Monitor Functions
The North American frequency of 433 MHz will produce an upscale indication for both the low and high frequency sensors, providing a more complete verification. Narda Nardalert S3... -
Page 24: Screen Navigation
2. If the selection process is not active, move the arrow previous Screen. Scroll the Down icon down to the next item. screen if unit is text if necessary. Arrow not in a safety Hold (1 alarm state. second) Nardalert S3 Narda... -
Page 25: Additional Capabilities Of Optioned Units
Sets fiber optic interface for communication or remote vibrator operation. Factory default is the communication setting. History Displays maximum, minimum and average readings for the last 6 minutes. Last Calibration Displays last calibration dates for sensor and monitor. Narda Nardalert S3... -
Page 26: Navigating Sub-Menu Screen Example
“Save and Exit” line (by tapping twice). Tap the key to return to the menu selection screen. Nardalert S3 Narda... -
Page 27: Operation Overview
Operation overview Normal operation Special environmental operations Using the Nardalert S3 as an area monitor 5.1 Normal operation The NS3 should be fully charged and configured for your personal use. The factory provides both a lanyard attachment and a belt clip for your conve- nience, and a silicon skin to help provide protection for the unit against shock. -
Page 28: Special Environmental Operations
The NS3 has not, at the time of this writing, developed a high power sensor for use with RF clothing. Persons wearing RF clothing should not use this monitor under the clothing. Currents flowing through the clothing could cause the monitor to false alarm. Nardalert S3 Narda... -
Page 29: Using The Nardalert S3 As An Area Monitor
USB supply while employing the Fiber Optic interface for communicating field level information back to a computer. Multiple NS3s can be connected to the Narda NBM-580 meter (up to 8) which functions as an interface between sensors and alarms. In Section 8.4,... - Page 30 5 Operation overview Nardalert S3 Narda...
-
Page 31: Instrument Maintenance
1. Use a soft cloth to clean the monitor. You can use lukewarm water to which a little detergent solution has been added as a cleansing agent. 2. To prevent streaks and spots, wipe off the monitor with a dry cloth while it is still damp. Narda Nardalert S3... -
Page 32: Verification Overview
“square-law” region to yield accurate results even in complex, multi-signal environments. • A diode-dipole antenna is added to complement the low frequency sensor in the UHF region and to optimize detection of any and all polarizations. Nardalert S3 Narda... -
Page 33: Testing Rf/Microwave Sensors
(>10 Watts). The NS3 is factory tested inside of a “TEM” cell at frequencies below 300 MHz, and then positioned in front of standard gain horns from 300 MHz to 50 GHz. Special arrangements are made by Narda to test frequencies above 50 GHz. Refer to IEEE 1309 Standard for field generation methods. -
Page 34: Operational Tests
Generally the unit is tested at 1, 10, 50, 100, 150, 200 and 300 MHz while in the TEM cell. Power should be increased slowly until the NS3 alarms at the set Alarm 1 level (50%). Slowly decrease and then increase power again to determine dB difference from calculated to actual alarm points. Nardalert S3 Narda... -
Page 35: Anechoic Chamber (F > 300 Mhz)
6.3 Authorized service centers Narda STS products are designed to help protect persons from high-level EMF fields. Therefore, they should be periodically calibrated and serviced by only authorized facilities that have the critical equipment and capability to service these unique products. -
Page 36: Disposal
Within the European Union, all electronic measuring systems purchased from Narda after 13th August 2005 can be returned when they reach the end of their useful life. The measuring systems that come under this regulation or the documents that accompany them are clearly marked with the symbol of a garbage bin crossed out with black lines. -
Page 37: Specifications
Specifications Monitor specifications Sensor specifications Outline drawing Declaration of conformity Declaration of origin Narda Nardalert S3... -
Page 38: Monitor Specifications
0.5 lbs. (0.23 kg), with sensor AC Charger with Plugs, Car (12VDC) Charger, Accessories Charger/Data cable (USB), Carrying Case, Belt Clip, Lanyard Clip, User's Guide, NS3-TS Software, (included) Calibration Certificate(s) Only for basic instrument; sensors are specified separately Nardalert S3 Narda... -
Page 39: Sensor Specifications
32 dB Above Standard or Guidance (related to 100%) ELF Immunity 6 kV/m Recommended Calibration 2 years Interval 7.3 Outline drawing 4.61 in. 3.25 in. (117.1 mm) (82.6 mm) 1.65 in. (41.9 mm) 1.25 in. (31.8 mm) Narda Nardalert S3... -
Page 40: Declaration Of Conformity
7 Specifications 7.4 Declaration of conformity Nardalert S3 Narda... -
Page 41: Declaration Of Origin
7.5 Declaration of origin 7.5 Declaration of origin Country of Origin United States of America Narda Nardalert S3... - Page 42 7 Specifications Nardalert S3 Narda...
-
Page 43: Ordering Information
Nardalert S3 system part numbers Optional accessories 8.1 Nardalert S3 part numbers Nardalert S3 Set 1 Narda Broadband Field Monitor Includes*: Nardalert S3 Basic Unit, including 1 x LIon battery, RCR123A (2270/01) Carrying Case, holds monitor, charger and accessories (11230500) 2270/101... -
Page 44: Sensor Part Numbers
2260/91.03 Cable, optical fiber, duplex (1000 μm) RP-02, 50 m 2260/91.04 Cable, optical fiber, duplex, F-SMA to RP-02, 0.3 m 2260/91.01 Nardalert S3 Mounting Bracket (for fixed monitoring) 11232200 Fiber Optic Converter RS232, RP-02/DB9 2260/90.06 Fiber Optic Converter USB, RP-02/USB 2260/90.07... -
Page 45: Warranty Information
The limit of liability under this warranty shall be to repair or replace any product, or part thereof, which proves to be defective after inspection by Narda STS. This warranty shall not apply to any Narda STS product that has been disassembled, modified, physically or electrically damaged or any product that has been subjected to conditions exceeding the applicable specifications or ratings. - Page 46 E-Mail: NardaSTS@L-3COM.com www.narda-sts.us Germany Sandwiesenstrasse 7 72793 Pfullingen, Germany Phone: +49 (0) 7121-97 32-777 Fax: +49 (0) 7121-97 32-790 E-Mail: support@narda-sts.de www.narda-sts.de Italy Via Leonardo da Vinci, 21/23 20090 Segrate (MI) ITALY Phone: +39 02 26952421 Fax: +39 02 26952406 E-Mail: support@narda-sts.it...