The Flash Tt Frame Kit - Dedacciai Strada flash tt Owner's Manual

ThE fLASh TT fRAME KIT

Triathlon and chrono super-aero frame kit for road purpose on smooth roads.
The frame has been thoroughly and intensively engineered with the purpose of
taking advantage in the air penetration. These combined technologies offer up to
3.8km/h advantage in the average speed, and up to 20 watts saving power to an
average 40km/h breakaway
The aero oversized tube shape is engineered with the use of extremely high
modulus carbon. This results in a very light frame, without compromising stiffness.
The dual purpose internal cable routing uses the same holes for mechanical and
electronic shifting, resulting in a very clean design without excess holes.
Dedacciai engineers have intensively work in decreasing front surface in order to
get the best air penetration profile thanks to the association of top tube, stem,
handlebar.
Each FLASH TT frame carries a serial number, stamped underneath of the down
tube, close to the bottom bracket. The serial number is used for traceability and
warrantee purposes. Do not remove or grind the number.
4.1 MATERIAL
Mistubishi carbon fiber MRc MRc60/40
•
•
•
•
•
•
4.2 WEIGhT
•
•
*Weight of painted frame, real weight may differ from the weight mentioned above
by ± 10%
14
MRc 60T front monocoque
MRc 40T rear triangle
Alloy carbon bottom bracket
carbon drop out with 6 mm off-set (rear drop-out with reinforced alloy body)
Alloy front derailleur hanger brazed-on-type via bolts
Alloy rear derailleur hanger
1.180 grams for M size in painted conditions
FLASH TT fork 440 grams in painted conditions