Care And Maintenance; Troubleshooting Guide - Nevir NVR-9840H-9 User Manual

9 litters toaster oven
Table of Contents

Advertisement

Available languages

Available languages

Cleaning Your Appliance
Before cleaning your appliance, unplug it and allow it to cool.
Remove the wire rack, drip/baking pan and crumb tray.
Use a damp cloth to wash the inside with warm water and a mild detergent. DO NOT IMMERSE IN
WATER! Abrasive cleaners, scrubbing brushes and chemical cleaners may damage the continuous clean
coating on this unit.
Wash the wire rack, drip/baking pan and crumb tray with a mild detergent solution.
The glass oven door should be cleaned regularly with a non-abrasive liquid cleaner.
Rinse with a damp cloth and then a dry one.
The outside of the appliance should be cleaned with mild detergent and warm water.
CAUTION
Failure to unplug the appliance could result in electrical shock or personal injury.
Storing Your Appliance
Allow the appliance to cool completely before storing. If storing the appliance for long periods of time
make certain that the appliance is clean and free of food particles. Store the appliance in a dry location
such as on a table or countertop or in a cupboard shelf. Other than the recommended cleaning, no further
user maintenance should be necessary.
You can solve many common appliance problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
P
R
O
B
L
Appliance does not operate.
Only one heating element is heating up.
Heating elements are not heating up.
Overcooked/undercooked Foods
Burnt Smell

CARE AND MAINTENANCE

PROBLEMS WITH YOUR APPLIANCE?

TROUBLESHOOTING GUIDE

E
M
S
P
O
S
S
B I
L
E
C
A
U
Unit not plugged in. Plug the unit into a 120V AC
electrical outlet.
The circuit breaker tripped or a blown fuse.
Be sure that the function and timer selectors are set.
Function setting selection determines which heating
element will operate.
When toasting, make sure the oven is not set to
BROIL or BAKE setting.
Make sure the function selector is positioned to the
desired cooking setting.
Incorrect timer setting. You may have to adjust the
timer to desired position.
Rack placement. Rack may need to be adjusted to
accommodate different foods.
Food build-up inside appliance, on heating elements
or in drip/baking pan. Refer to "Cleaning Your
Appliance"
8
S
E
S
S /
O
L
U
I T
O
N
S

Advertisement

Table of Contents
loading

Table of Contents