Philips 170X6 User Manual page 14

Product Information
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities
• Video interface
• Light Frame
Audio
• Loudspeaker
• Headphone connector
• Input signal connector
• Stand-alone audio output
Optical characteristics
• Contrast ratio
• Brightness
• Peak contrast angle
• White Chromaticity
• Viewing Angle (C/R>5)
• Response time
* This data is subject to change without notice.
Resolution & Preset Modes
file:///D|/My%20Documents/dfu/X6_model/english/170x6/product/product.htm (8 of 12)2005-06-27 1:27:06 PM
75 ohm
2.2K ohm
0.7 Vpp
Separate sync
Composite sync
Sync on green
Positive and negative
Dual input: D-Sub (analog) and DVI-D (digital) are available and user
selectable
TM
Brightness and sharpness enhancement
4W Stereo Audio (2W/channel RMSx2, 300 Hz-14 kHz, 16 ohm,
THD=10%, PMPO 32 Watts)
3.5mm mini jack
3.5mm mini jack
Whether there is a video display or not as long as there is an audio
input, the audio output is always functional.
600:1 (typ.)
2
250 cd/m (typ.)
6 o'clock
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
Upper 80° (typ.)
Lower 80° (typ.)
Left 80° (typ.)
Right 80° (typ.)
8 ms(typ.)
RETURN TO TOP OF THE PAGE