Auxiliary Function Selection; Starting The Programme; Child Lock - Beko WTV 7531 X0 User Manual

4.10 Auxiliary function selection

Select the required auxiliary functions before starting the program.
Furthermore, you may also select or cancel auxiliary functions that
are suitable to the running programme without pressing the Start /
Pause button when the machine is operating. For this, the machine
must be in a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light of the
relevant auxiliary function will blink 3 times to warn the user.
C
Some functions cannot be selected together. For example,
Prewash and Quick Wash.
If a second auxiliary function conflicting with the first one is
selected before starting the machine, the function selected first
will be cancelled and the second auxiliary function selection will
remain active. For example, if you want to select Quick Wash
after you have selected the Prewash, Prewash will be cancelled
and Quick Wash will remain active.
Auxiliary function that is not compatible with the program cannot
be selected. (See "Programme and consumption table")
Auxiliary Function buttons may vary according to the model of
the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the
Prewash will save energy, water, detergent and time.
C
Prewash without detergent is recommended for tulle and
curtains.
• Quick Wash
This function can be used in Cottons and Synthetics programmes. It
decreases the washing times for lightly soiled laundries and also the
number of rinsing steps.
C
When you select this function, load your machine with half of
the maximum laundry specified in the programme table.
Delayed Start (In some models only)
With the Delayed Start function the startup of the programme may be
delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed Start! There
is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent, etc.
Select the washing programme, temperature, spin speed and, if
required, the auxiliary functions. Set the desired time by pressing
the Delayed Start button. When the button is pressed once, 3 hours
delayed start is selected. When the same button is pressed again, 6
hours delay is selected, and when it is pressed for the third time, 9
hours delayed start is selected. If you press the Delayed Start button
once again, Delayed Start function will be canceled. Press Start /
Pause button. Previous delayed start time light turns off and next
delayed start time light turns on after every 3 hours. At the end of
the countdown, all delayed start lights will turn off and the selected
programme will start.
C
Additional laundry may be loaded during the delayed start
period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is pressed, the
period will change in 3-hour increments and the light of the selected
delayed start time will turn on.
13 / EN
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the
programme immediately:
Set the Delayed Start period to zero (all delayed start period lights will
turn off) or turn the Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled. The End/Cancel light
flashes continuously. Then, select the programme you want to run
again. Press Start / Pause button to start the programme.

4.11 Starting the programme

Press Start / Pause button to start the programme. Programme
follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 1 minute
during programme selection process, the machine will switch
to Pause mode and the illumination level of the temperature,
speed and loading door indicator lights will decrease.
Other indicator lights and indicators will turn off. Once the
Programme Selection knob is rotated or any button is pressed,
indicator lights and indicators will turn on again.

4.12 Child Lock

Use child lock function to prevent children from tampering with the
machine. Thus you can avoid any changes in a running programme.
C
If the Programme Selection knob is turned when the Child Lock
is active, "Con" appears on the display. The Child Lock does
not allow any change in the programmes and the selected
temperature, speed and auxiliary functions.
C
Even if another programme is selected with the Programme
Selection knob while the Child Lock is active, previously
selected programme will continue running.
C
When the Child Lock is active and the machine is running, you
can switch the machine to Pause mode without deactivating
the Child Lock by turning the Programme Selection knob to On
/ Off position. When you turn the Programme Selection knob
afterwards, the programme will resu
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary Function buttons for 3 seconds.
The lights on the 1st and 2nd Auxiliary Function buttons will flash
while you keep the buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxiliary function buttons for 3 seconds
while any programme is running. The lights on the 1st and 2nd
Auxiliary Function buttons will flash while you keep the buttons
pressed for 3 seconds.
C
In addition to the method above, to deactivate the Child
Lock, switch the Programme Selection knob to On / Off
position when no programme is running, and select another
programme.
C
When the power is restored after a power failure or after your
machine is unplugged and plugged in again, the Child Lock will
not be deactivated when the machine resumes operating.
Washing Machine / User's Manual