Cycle Collection - Gilson FC 203B Quick Reference Manual

Cycle Collection

The fraction collector enables collecting fractions two
different ways:
• collect each sample, or full collection cycle, into the
same set of tubes. during the run, each cycle begins at
tube 1.
• collect each sample, or full collection cycle, into a new
set of tubes. during the run, each cycle begins at the
tube following the last tube of the previous cycle.
The tubes per cycle Parameter in the technical Menu
EDIT 2) allows for indicating how the fractions will
(press
be collected.
To collect each sample into the same set of tubes, set the
tubes per cycle Parameter to 0 (zero).
To collect each sample into a new set of tubes, set the
tubes per cycle Parameter to a value other than 0 (zero).
using the tubes per cycle and the total tube capacity for
the rack, the number of cycles is calculated. if the number
of tubes per cycle cannot be divided evenly into the tube
capacity for the rack, the number of cycles is the whole-
number quotient; the remaining tubes are not used.
Refer to the user's guide for more information.
FC 203B FraCtion ColleCtor | Quick RefeRence Guide
11