Appendix; Installing The Printer Software; Using A Usb Cable - Lexmark Z51 User Manual

Appendix

In this section, you can find
information about:
•

Installing the printer software

•

Using a USB cable

• Printing from DOS
• Warranty
• Notices
• Safety information
Installing the printer
software
You can obtain the printer software
from the CD-ROM, diskettes, or
World Wide Web.
Using the CD-ROM
If your computer has a CD-ROM
drive, follow the steps in the Getting
Started booklet to install your printer
software.
If your computer does not have a
CD-ROM drive, you can create
driver diskettes using another
computer with a CD-ROM drive.
Using diskettes
If your computer does not have a
CD-ROM drive, ask our Customer
Support Center to mail you diskettes.
Refer to the printer registration card
for the number in your country.
Follow the instructions to install the
printer software from diskettes.
Windows 95 or 98
1
Start Windows.
2
Insert Setup Disk 1 into your
disk drive.
3
From the Start menu, choose
Run.
4
In the command-line text box,
type the letter of your disk
drive, followed by :/setup (for
example, a:/setup), and then
click OK.
5
When prompted by the printer
software, insert the appropriate
disks into your disk drive and
click OK.
6
Follow the instructions on the
screen.
Windows 3.1 or 3.11
1
Start Windows.
2
Insert Setup Disk 1 into your
disk drive.
3
From the Windows Program
Manager menu bar, choose
File, and then choose Run.
4
In the command-line text box,
type the letter of your disk
drive, followed by :/setup (for
example, a:/setup), and then
click OK.
5
When prompted by the printer
software, insert the appropriate
disks into your disk drive and
click OK.
6
Follow the instructions on the
screen.
Using a downloaded
printer driver
If your computer does not have a
CD-ROM drive, you can download a
driver from Lexmark's World Wide
Web site.
1
From Lexmark's web page,
select the appropriate driver for
your operating system.
2
Select Save to Disk.
3
Select a location on your hard
drive.
4
Double-click the executable
(.exe) file to open it.
The WinZip Self-Extractor
window opens.
5
Follow the instructions on your
screen.
Using a USB cable
If you are using Windows 98, you
can connect your printer to your
computer with a USB (Universal
Serial Bus) cable, such as Lexmark
P/N 43H5856.
Connecting the USB cable
1
Make sure your computer and
printer are off.
2
Connect the USB cable to the
port on the back of your
computer.
Appendix
67