Kurzweil M110 User Manual page 11

Assembling Left/Right Side Panel Stand
➋ Side Panel(Left) Stand
➌ Side Panel(Right) Stand
➍ Pedal Box
➐ Pedal Box Set Bolt
Assembling Back Panel
➎ Back Panel
Pedal Cable
➑ Back Panel
Set Bolt
➓ Cable Clamps
➒ Back Panel
Set Screw
Caution
Please arrange the pedal cable after completely assembling the back panel with the side
panel and pedal box.
1) Put the cable in the Pedal Box❹ out.
2) Starting with the left stand leg❷, align the holes
in the Pedal Box❹ with the holes in the left stand
leg❷, then thread the Pedal Box Set Bolts➐ into
the holes.
3) Repeat with the right stand❸ and tighten all bolts
fully.
1) Place the Back Panel❺ on the assembled stand
legs. Align the holes in the Back Panel❺ with the
bracket in the stand legs, then fasten them by
using the Back Panel Set Bolts➑ as shown.
2) Attach the Pedal Box❹ to the bottom of the Back
Panel❺ and thread the Back Panel Set Screws➒
into the 4 holes.
3) After placing the Cable Clamps➓ over the pedal
cable, stick it on the back panel, then arrange the
cable behind the Back Panel❺.
9