Figure 7.4-4
Figure 7.4-5
Pagina 7.14
CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
To reassembly the receiver:
1. On the Salutron receiver is possible to see
2. Connect the cables to the receiver, as in the
3. Wrap the receiver again in the sponge (h),
4. Reinsert the receiver inside of the home.
To reassemble the cardio receiver, carry out the
the coil (e) and the connectors (f) and (g).
figure to side.
using a cable tie to fix it.
ATTENTION: Position the receiver so
that the coil is oriented towards the user.
above steps in reverse order.