Taking Care Of Your Machine; Emptying The Water Tank - Vax DCS2V1MP Let's Get Started

Taking care of your machine

IMPORTANT: Do not leave water stored in the water tank between uses.
Always switch the appliance off and unplug from the mains when removing or refitting the water tank or filter,
and before carrying out any maintenance or troubleshooting checks.

Emptying the water tank

IMPORTANT: Do not attempt to remove the float from inside the tank.
When the water tank is full or incorrectly fitted, the LED light on the front of the appliance will flash. The appliance
will operate for several minutes and then shut down. The LED light will continue to flash.
Using the release handles pull either Carry the water tank carefully by the
side of the water tank and remove handle. The water tank cover is not
the water tank from the back of the detachable.
appliance.
Empty the water tank over a sink and
rinse tank. Wipe the outside of the tank
with a clean dry cloth and refit tank.
Emptying the water tank
With the water tank removed from the Lift and remove the cover from the
appliance, gently pull one side of the water tank.
water tank handle to detach from the
water tank cover.
Pull and remove the other side of the
handle from the cover.
Taking care of your machine
Rinse the tank under water and wipe
dry with a clean cloth.
Refit the water tank cover and the
handle to secure cover into place.