Hitachi CP-S335 Service Manual page 40

Multimedia lcd projector.

Hide thumbs Also See for CP-S335:

Table of Contents

Please follow the procedure below in removing the LAMP FAN/DUCT at maintenance; remove the

POWER UNIT prior to the LAMP FAN/DUCT, because the WIRE is routed underneath the POWER

SUPPLY UNIT.

1) Unscrew the SCREW-1 and SCRW-2, and remove the POWER SUPPLY UNIT.

2) After remove the SCREW-3 and TAPE, lift and remove the LAMP FAN/DUCT.

Remove the LAMP FAN/DUCT carefully so that

this part does not catch and break off as shown in figure.

CP-S335(C9SM)/CP-X340(C9X)/CP-X345(C9XM)

POWER SUPPLY UNIT

LAMP FAN/DUCT

Table of Contents

Show Quick Links

Table of Contents

Cp-x340 Cp-c9sm Cp-c9x Cp-x345 Cp-c9xm