Hitachi CP-S335 Service Manual page 39

3. Putting the power supply unit together after the
maintenance of the POWER UNIT (CIRCUIT)
and/or the POWER UNIT (BALLAST).
WARNING
Assemble the power supply unit
with care to achieve the required
insulation. Incorrect assembly
could cause a fi re and/or an elec-
tric shock.
(1) Attaching the Power Center Sheet
Warning
Hook claw.
Power Center Sheet
(2) Attaching the Power Side Sheet
Warning
Insert sheet between POWER BOARD
(CIRCUIT) and the Power Side Sheet.
POWER-BRACKET
POWER BOARD (CIRCUIT)
CP-S335(C9SM)/CP-X340(C9X)/CP-X345(C9XM)
Power Side Sheet
(3) Attaching the Power Sheet
POWER-BRACKET
Warning
Attach Power Sheet so that its shaded
edge cannot contact to POWER UNIT
(BALLAST).
Power Sheet
39
Power Sheet
Warning
Insert tab into slit.
Warning
Clip tab.