Troubleshooting - Philips 150S4FS Electronic User's Manual

Troubleshooting

Troubleshooting
Safety and Troubleshooting
Information • Other Related Information
This page deals with problems that can be corrected by the user. If the problem still persists after you
have tried these solutions, contact your nearest Philips dealer.
Common Problems
Having this problem?
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
file:///D|/B/english/150s4fgbs/safety/saf_troub.htm (1 of 3) [8/27/03 11:39:40 AM]
• FAQs • Common Problems
Check these items
• Imaging Problems
Make sure the Power cable is plugged to the
wall and the back of the monitor.
Firstly, ensure that the power button in front
of the monitor is in the OFF position, then
press it to ON position again.
Make sure the computer is turned on.
Make sure the signal cable is properly
connected to your computer.
Check to see if the monitor cable has bent
pins.
The Energy Saving feature may be activated
Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Set-Up Guide).
Check to see if the monitor cable has bent
pins.
Make sure the computer is turned on.
• Regulatory