Technics ST-C700D Operating Instruction page 19

2
Press [NWP].
3
Press [N INPUT O] below [NWP] repeatedly
to select "USB".
4
Press [3, 4] to select an item and then
press [OK].
≥ If there are any other items, repeat this step.
Operations on the remote control
Stop Press [∫].
Press [1/;].
Pause
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
During play or pause, press and hold
[6] or [5].
Search
≥ On the unit: press and hold [:] or [9].
≥ This operation may not be available for
some formats.
∫ Random repeat playback
Press [RND].
Each time you press the button:
All tracks in a folder are repeated
randomly.
On
≥ "RND `" is displayed.
≥ During random playback, you cannot skip to
the previous track.
Off Turns off random repeat mode.
∫ Repeat playback
Press [`].
Each time you press the button:
Only plays the selected track.
1-Track
≥ "1 `" is displayed.
All tracks in a folder are repeated.
All
≥ "`" is displayed.
Off Turns off repeat mode.
≥ You can use repeat playback in combination with programme
playback.
Programme playback
This function allows you to programme up to 24 tracks.
Preparation
≥ It is not possible to programme tracks by moving folders.
Move all the tracks you want to programme to a single
folder in advance.
1
Select the folder containing the music file to
which you want to set programme playback.
2
Press [PGM] in the stop mode.
≥ "Program Mode" screen will be displayed.
3
Press [OK] to display the programming
screen.
4
Press [3, 4] to select the desired track.
5
Press [OK].
≥ Do steps 3 through 4 again to programme other tracks.
6
Press [1/;] to start playback.
≥ To return to the "Program Mode" screen, press [∫].
Operations on the remote control
Press [∫].
Stop
≥ Programmed content is maintained.
Check the Press [2, 1] in the stop mode.
programmed ≥ To return to the "Program Mode" screen,
press [OK].
order
Add tracks Do steps 3 through 4 in the stop mode.
Press [CLEAR] in the stop mode.
Clear the last
≥ It is not possible to select and clear the
track
desired programmed track.
1 Press [PGM] in the stop mode.
≥ "Clear Program List?" is shown.
Cancel
2 Press [3, 4] to select "Yes" and
programme
then press [OK].
mode
≥ The programme memory will be
cleared.
≥ Programmed content is maintained as long as the input source is
set to "USB".
≥ The programme memory will be cleared:
– When the USB device is disconnected.
– When the unit is turned to standby or off mode.
≥ You can use programme playback in combination with repeat
playback.
19
(19)