Philips 150P2E Electronic User's Manual page 37

Troubleshooting
The screen is too bright or too dark
An after-image appears
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the
file:///D|/Grace/150P2/english/150p2e/safety/saf_troub.htm (2 of 2) [9/5/2001 11:06:38 AM]
Adjust the contrast and brightness in OSD Main Controls. (The
backlight of the LCD monitor has a fixed life span. When the
screen becomes dark or begins to flicker, please contact your
dealer.
If an image remains in the screen for an extended period of time, it
may be imprinted in the screen and leave an after-image. This
usually disappears after a few hours
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-image
will disappear after a set amount of time
The remaining dots are normal characteristic of the liquid crystal
used in today's technology.
Consumer Information Centers
RETURN TO TOP OF THE PAGE
list to contact your local Philips distributor.