Compatibility With Other Peripherals - Philips 150P Electronic User's Manual

FAQs (Frequently Asked Questions)
A:
The FPadjust program generates alignment patterns that help you adjust monitor settings such
as Contrast, Brightness, Horizontal Position, Vertical Position Phase, and Clock for optimal
performance.
Q:
When I install my monitor, how do I get the best performance for the monitor?
A:
1.
For best performance, make sure your display settings are set at 1280x1024@60Hz. Note: You can
check the current display settings by pressing the OSD OK button once. The current display mode is
shown at the bottom on the menu window.
2.
To install the Flat Panel Adjust (FPadjust) program located on the monitor setup disk or CD-ROM,
open the setup disk or CD-ROM and double-click the FPadjust.exe icon. This will install FP Adjust
automatically and place a shortcut on your desktop.
3.
Run FPadjust by double clicking the shortcut. Follow the instructions step by step to optimize image
performance with your system's video controller.
Q:
How do LCDs compare to CRTs in terms of radiation?
A:
Because LCDs do not use an electron gun, they do not generate the same amount of radiation at
the screen surface.
Q:
What is the screen size enlarge function?
A:
User want the best possible display quality regardless of the size of the image. However LCD
panel characteristics require some tradeoffs. For example, the 150P highest resolution is 1024x768.
In other words, there are 1024x768x or786,432 pixels on this 15-inch LCD screen. When the monitor
needs to display at a lower resolution, say 640x480, the image on the screen is smaller because it
requires fewer pixels. The 150P can expand a low-resolution screen to any desired size including a
full screen. In the expansion mode, users have a choice between size and display accuracy.
Q:
How can I adjust the screen?
A:
The screen brightness may be adjusted using the Brightness control in the OSD. Scaling an
image in this manner results in slight brightness "fuzziness" or distortion.

Compatibility with other Peripherals

file:///E|/manual/english/150P/safety/saf_faq.htm (4 of 9) [12/13/1999 8:00:09 PM]
RETURN TO TOP OF THE PAGE