Troubleshooting
An after-image remains after the
power has been turned off.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the
Philips distributor.
file:///D|/My%20Documents/dfu/A5_new/ENGLISH/150B6/safety/saf_troub.htm (3 of 3)2005-06-07 4:48:01 PM
This is characteristic of liquid crystal and is
not caused by a malfunction or
deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
The remaining dots are normal
characteristic of the liquid crystal used in
today's technology.
Consumer Information Centers
RETURN TO TOP OF THE PAGE
list and contact your local