HoMedics BPA-201 Instruction Manual page 17

3. Open the arm cuff so that your arm may be placed
through it.
4. Remove tight fitting clothing from your upper left arm so
that the cuff can be wrapped around your exposed arm.
5. Position cuff edge 0.8-1.2
inches (2-3 cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between
the cuff and your arm.
8. Lay your arm on a table (palm upward)
so the cuff is at the same height as
your heart. Make sure the tube is
not kinked.
16