RED DEVIL RED2S305 Owner's Manual page 7

 Visually check the shipping pallet and packaging for any shipping damage.
 Unpack the snow blower from the shipping pallet.
 Grease all of the grease zerks on your snow blower. (See below drawing)
o One on each end of the auger outer bearing holder.
o One on the cross drive outer bearing holder.
o One on the shear flange sprocket.
o Two on chute rotation.
 Check the chain tension. Adjust idler sprocket if needed.
 Check the gear box oil level by removing the fill plug and checking for 9 ounces of oil.
 Make sure the chute rotation mechanism is working freely.
 Make sure the deflector mechanism is working freely.
 Make sure the impeller and auger are free of foreign objects.
 Make sure all decals and safety signs are clean and readable.
 Make sure all safety shields are in place and in good condition.
 Make sure all nuts, bolts, and pins are tightened and secure in place.
 Make sure the hydraulics are in good working condition by testing each function and checking for leaks.
12/1/2016 www.reddevilsnowblowers.com | Red Devil Snow Blowers
Preliminary Check
MAKE SURE ENGINE IS SHUT OFF AND KEYS ARE REMOVED
Use Synthetic 80/90 Gear Oil In Gear Box
Red Devil Snow Blowers is a registered trademark of Lankota Group.