Getting Started - Philips 140S1 User Manual

Getting Started

Getting Started
Your LCD Monitor :
Started • Optimizing Performance
Accessories (optional) :
Getting Started
1.1 First turn on your monitor and other peripherals if any, then turn on your computer.
1.2 If your monitor displays an image and Windows prompts you for an .inf file or driver disk, please go to
step 1.4.
1.3 If your monitor displays the message "Cannot Display This Video Mode", please follow the procedure
below to set your computer for the recommended video mode: 1024 x 768 @ 60Hz
Unplug all cables.
Connect your PC to the monitor that you used previously and which displayed correctly.
In the Windows Start Menu, select Settings --> Control Panel. In the Control Panel Window, select the
Display icon. Inside the Display Control Panel, select the "Settings" tab. Under the Settings Tab, in
box labeled "desktop area", move the slidebar to 1024x768 pixels (for 150P / 150B) or 1280x1024
pixels (for 181AS). Open "Advanced Properties" and set the Refresh Rate to 60Hz, then click OK.
Restart your computer and repeat step on the third bullet point to verify that your PC is set at
1024x768, 60Hz (for 150P / 150B) or 1280x1024, 60Hz (for 181AS).
Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
Turn on your monitor and then turn on your PC.
1.4 Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk. Follow the
instructions to insert the CD-ROM included in this package, and the monitor drivers (.inf and .icm files) will
be installed automatically. Alternatively you can follow the link to the
drivers.
file:///D|/Philips LCD/english/150B/INSTALL/GT_START.HTM [1/20/2001 3:07:36 PM]
Front View Product Description
Installing the Protective Cover
RETURN TO TOP OF THE PAGE
• Connecting to Your PC
• Installing the Wall Mount Kit
Download & Print
• Getting
chapter to install the