Philips 109B7 User Manual page 17

7. Why does the picture on the screen appear to flicker?
A low refresh rate or electrical interference typically causes flickering in the picture. Possible
solutions include the following:
Verify that the proper drivers are installed for your video card
Make sure that all electrical devices (such as mobile phones) are at least
1m from the monitor
Place the monitor in another physical location away from electrical
interference
Adjust the refresh rate to 75hz or higher.
8. How do I adjust my monitor's resolution?
Available resolutions are determined by the capabilities of your video card and graphic driver.
Under Windows '95, you may select the desired available resolution through the 'Display
properties/Settings' menu.
9. How can I adjust the size, position and rotation of my screen?
Depending on the model you own, you can use your CustoMax Software, On
Screen Display (OSD) or control knobs located on the monitor.
10. What if I get lost when making monitor adjustments?
Simply press OK button then select "Reset to factory settings" to restore all
settings.
11 . The Main Menu displays OSD MAIN MENU LOCKED . Pressing the
front control panels hasno effect. How can I unlock this function?
Press and hold the OSD menu key for about 15 seconds until picture displays
"OSD MAIN MENU UNLOCKED"
12. My screen shows NO SYNC INPUT , how can I get rid of this?