Emergency Engine Stop - Mazda mx-5 Miata 2017 Smart Start Manual

STARTING THE ENGINE WITH
ACCELERATED WARM-UP SYSTEM (AWS)
The MX-5 is equipped with SKYACTIV combustion technology.
This technology includes AWS (Accelerated Warm-up System) for
optimal emission performance during cold starting conditions.
While Carrying the Key...
• Start the engine by pushing the START/
STOP ENGINE button while pushing the
clutch pedal (M/T) or the brake pedal (A/T).
• What you will notice? On start-up, the
engine speed and sound are higher (1500 RPM) for
less than 1 minute to quickly bring the catalyst to
efficient operating temperature. The RPM will reduce
to idle once the temperature is achieved. This is
normal engine operation under cold start conditions.
• What this does? This heats up the catalytic
converter faster to reduce emissions and allows
Mazda to use an exhaust header on the engine (to
improve efficiency and horsepower).
• Shut the engine OFF by making sure the vehicle is in park (A/T) and
setting the parking brake, then push the START/STOP ENGINE button.
• Activate Accessories (ACC) by pushing the START/STOP ENGINE
button once without pushing the clutch or brake pedal.
• Turn the ignition to the ON position by pushing the START/STOP
ENGINE button twice without pushing the clutch or brake pedal.

Emergency Engine Stop

Pushing and holding the START/STOP button or repeatedly pushing
the button while the engine is running will turn the engine OFF. Use only in
case of an emergency.
NOTE:
The engine may not start if the key cannot be detected. The Key
Indicator Light may flash
is placed in the cup holder.
If the START/STOP ENGINE button indicator light flashes AMBER, this could
indicate a problem with the engine starting system. You may not be able to start
the engine or switch the ignition to ACC or ON. Have your vehicle inspected at an
Authorized Mazda Dealer as soon as possible.
2665980 17b Mazda MX5 SSG 080116.indd 4
RED or "Key not detected" may be displayed if the key
www.MazdaUSA.com
NOTE:
You can drive
the vehicle during AWS
activation, no need to wait.
START/STOP
Indicator Light
4
8/1/16 12:39 PM