Leading Edge 56001A Assembly Instructions And Parts List

MODEL: 56001A, 56001BA, 56011A,
56007A, 60001A, 60011A
BLADE
MODEL
SWEEP
NUMBER
56"
56001A
56"
56001BA
56"
56011A
56"
56007A
60"
60001A
60"
60011A
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR SERVICE THE LEADING EDGE
CEILING FAN. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
RETAIN FOR FUTURE REFERENCE.

General Safety Information

WARNING: DISCONNECT POWER BEFORE
INSTALLING OR SERVICING THIS EQUIPMENT.
1. All electrical wiring should be done by a qualified
electrician in accordance with applicable National
Electrical Code and local electrical codes.
2. Do not allow moving blades to come in contact with
any part of the body.
3. Mount fan so that fan blades are 10 feet or higher
from floor.
4. Make sure hanger hooks are mounted securely to
structural ceiling members.
5. Do not mount in an area which will allow the fan to
get wet.
WARNING: DO NOT USE IN AN EXPLOSIVE
ATMOSPHERE.
6. Make certain that the ground wire is connected to
the ground terminal and to a suitable electrical
ground.
NOTE: When mounted in cathedral ceilings, the blade tip
should be at least 12 inches from the angled roof line to
prevent air "blow back" causing possible fan sway.
CAUTION: Read and follow instructions carefully.
Failure to comply with instructions could result in the risk
of fire, shock, and injury to persons.
WARNING: TO REDUCE THE RISK OF PERSONAL
INJURY DO NOT BEND THE BLADE BRACKETS
WHEN INSTALLING THE BRACKETS OR CLEANING
THE FAN. DO NOT INSERT FOREIGN OBJECTS IN
BETWEEN ROTATING FAN BLADES.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL FOR
SPECIFICATIONS
COLOR VOLTAGE
White 120
Black 120
Brown 120
White 277
White 120
Brown 120
12/16
INDUSTRIAL CEILING FANS
CEILING FANS SHOULD BE INSTALLED
BY QUALIFIED INSTALLER.
MAX MAX
HZ RPM
50/60 275
50/60 275
50/60
275
50/60 260
50/60 315
50/60
315
Description
Leading Edge Fans are designed as a dual purpose
product. By minimizing temperature stratification in
winter, they can reduce heating costs in high bay
buildings. The summertime application provides a gentle
downward movement of air for general air recirculation
and evaporative cooling. A permanent split capacitor
motor and permanently lubricated ball bearings add to
the efficiency and quietness of the fans.
Unpacking
1. Remove fan components from carton carefully.
2. Check for shipping damage.
3. Check for missing parts against parts list.
RECOMMENDED MOUNTING HEIGHTS
For heat reclamation, this fan should be mounted on the
standard 2' downrod included. On installations through
drop ceilings, note the diameter of the downrod hole in
the ceiling should be 2 1 / ".
2
CAUTION: Fan blades should not be mounted lower
than 10 feet above the floor.
MAX WT
AMPS WATTS (LBS)
1.0 110 24
1.0 110 24
110
1.0 24
.60 110 24
1.4 160 30
160
1.4 30
5200-2399-005