Application Control; Using All Time Control - SoundGraph iMON User Manual

Next, let's start 'Task Switcher'. This function is similar to '[ALT]+[TAB]' key combination that
you use to activate the other application while using the application. 'Task Switcher' window
shows the program icons currently running in the Windows. Use arrow button to select the
program to activate and press Enter key.

3. Application Control

Now, once you have activated the program that you want using 'Application Launcher' and
'Task Switcher', you can use your remote controller to control the application. iMON supports
various media players (Windows Media Player, Winamp, iTUNE, PowerDVD, WinDVD and more)
and all settings for various media players control are automatically set during its installation
process. For example, if you want to control WinAmp, activate WinAmp and then control
WinAmp using remote controller. You can easily use the functions of WinAmp such as Open file
and folder, Play, Pause, Stop, Next, Previous, Volume Control. The point you should remind is
that the command that would be performed is different depending on what program is active.
Use 'Task Switcher' when you activate the other application without mouse or keyboard.

4. Using All Time Control

Basically, iMON Manager can control the application that is active. So if you want to control
'Windows Media Player' while 'WinAMP' is active, you have to activate 'Windows Media Player'
first using 'iMON Task Switcher'. But you can use the 'All-Time Control' in order to control the
specific S/W regardless of the current active state of the application. If you run the 'All Time
Control' you may see the following picture. The functions of the each screen button are as like
follows.
-36-