EINHELL E-PST Operating Instructions Manual page 9

Anleitung E-PST 710 Laser
1
Locking button
On/Off switch
Switching on: Press the On/Off switch
Continuous operation: Lock the On/Off switch with the
locking button
Switching off: Press the On/Off switch
and release
3
Turn the speed controller to increase the
cutting rate
5
Setting the pendulum action
Position 0: No pendulum aktion
Position 1: Slight pendulum action
Position 2: Moderate pendulum action
Position 3: Intensive pendulum action
13.08.2004 8:21 Uhr Seite 9
2
4
The soleplate can be adjusted through 45° by loosening
the screw.
6
Operating the laser
You can switch the laser ON and OFF with the switch 1.
The laser beam marks the line of the cut on the work-
piece.
GB
9