Connecting Your Toothbrush To Your Smartphone; Cleaning Recommendations; Accessories - Oral-B GENIUS 9000 Manual

Our dynamic «Deep Sweep» brush head can be used
with all common brushing techniques.
Oral-B Deep Sweep brush head
features triple zone cleaning action for
outstanding plaque removal, even in
between teeth.
Oral-B brush heads feature light blue INDICATOR®
bristles to help you monitor brush head replacement
need. With thorough brushing, twice a day for two
minutes, the blue color will fade halfway approximately
within 3 months, indicating the need to exchange your
brush head. If the bristles splay before the color
recedes, you may exert too much pressure on teeth
and gums.
We do not recommend using the Oral-B «FlossAction»
or Oral-B «3D White» brush head with braces. You may
use the Oral-B «Ortho» brush head, specifically
designed to clean around braces and wires.
Connecting your
toothbrush to your
Smartphone
The Oral-B™ App is available for mobile devices
running iOS or Android operating systems. It can be
downloaded for free from App Store
Play™.
The Oral-B™ App gives you the opportunity to chart
your brushing progress and customize your toothbrush
settings (for many more benefits see the Oral-B™ App
instructions).
• Start the Oral-B™ App. The app will guide you
through the entire Bluetooth pairing procedure.
Note: Oral-B™ App functionality is limited if
Bluetooth wireless technology is deactivated on
your smartphone (for directions please refer to your
smartphone's user manual).
• Any app instructions will be displayed on your
smartphone.
• If Bluetooth wireless technology is activated on your
handle, the Bluetooth symbol on the radio
transmission display (7) illuminates. Once the handle
is paired, the Smart Ring (2) flashes briefly.
• Keep your smartphone in close proximity (within
5m/16ft distance) when using it with the handle.
Make sure the smartphone is safely positioned in a
dry place.
Note: Your smartphone must support Bluetooth 4.0 (or
higher)/Bluetooth Smart in order to pair your handle.
or Google
SM
Cleaning
recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush head
separately; wipe them dry before reassembling. Unplug
the charging unit before cleaning. Brush head
compartment and protective cover are dishwasher-
safe. Basic charger should be cleaned with a damp
cloth only (picture ➄).

Accessories

Smartphone Holder
• Before each use, make sure mirror, suction cup
surface (10d) and holding brackets (10a) are always
clean and dry (picture A1). Press your smartphone
holder (10) gently, centered at nose level on the
mirror. Then mount the holder by carefully pressing
the lever arm (10b) towards the mirror until it snaps
in (picture A2).
Note: Only affix on mirror to ensure safe and correct
conditions. For use in bathroom only. Do not use in
automobiles.
• Always make sure the smartphone holder is
securely mounted on the mirror before inserting
your smartphone. Place your smartphone (portrait)
sideways in between the holding brackets (10a) by
pressing against one bracket with your phone and
sliding the other bracket to the side (picture A2).
Follow the same procedure to remove your phone
again.
• Adjust the overall position for the required angle by
moving the ball joint of the holder (picture A3).
Instructions for the best angle will be given via app.
• Once done, remove your phone from the holder.
Take off the smartphone holder by flipping the lever
arm back and pulling the tab carefully (picture A4
1./2.). Affix smartphone holder with each use again.
• The smartphone holder should be cleaned with a
damp cloth only. Store in clean and dry place. If not
in use, always remove your smartphone from the
holder.
Note: Smartphone width required for usage:
minimum 58mm (2.28 in), maximum 83mm (3.27 in).
Caution: Small parts may come off, keep out of
reach of children.
Charging Travel Case
• To charge your handle (5) place it on the pin in the
charging travel case (11) and connect it to an
electric outlet, using the extra smart plug (12)
provided.
• The flashing light (11a) of the charging travel case
indicates that the handle is charging. Once the
handle is fully charged the light turns off. A full
charge can take up to 12 hours (picture B1).
Note: You may use the USB port (11b) to charge an
9