Logitech Ultrathin Setup Manual page 4

Set up your product
1. Pull out the battery tag.
• Your keyboard powers up.
The status light shows solid green
for a few seconds.
• Bluetooth discovery starts
automatically and continues
for 15 minutes. The status light
blinks blue (fast blink).
• If the status light briefly
turns red, replace the batteries.
For more information, see "Replacing
your keyboard batteries."
2. Place your iPad into the slot in
the Keyboard Cover.
Ultrathin - Magnetic clip-on keyboard cover
4 English
®
3. Establish Bluetooth connection:
• On your iPad, make sure Bluetooth
is on. Select Settings > Bluetooth
> On.
• Select "Ultrathin" from the Devices
menu.
• Enter the six digit passkey shown on
your iPad screen using your Keyboard
Cover, and press Enter.
The status light shows solid blue for
a few seconds to confirm that Bluetooth
connection is complete.
4. Tilt your iPad to suit your viewing angle.
Multiple angles are available to select,
from 50° to 70°.
Note:
• You will need to apply downward pressure
when you tilt your iPad.
• The maximum weight that can be loaded
onto the slot is 5kg.
50°-70°