uuIf a Tire Goes FlatuChanging a Flat Tire
■
Getting Ready to Replace the Flat Tire
Handle
Cover
Wheel Nut Wrench
Jack
Handle Bar
Jack
622
1. Push the rear edge of the handle on the
floor lid and open the lid.
2. Pull and remove the cover. Take the wheel
nut wrench and jack-handle bar out of the
rear side compartment.
3. Loosen the strap, then take the jack out.
Strap
1Changing a Flat Tire
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.