Honda PILOT 2017 Owner's Manual page 182

uuAdjusting the SeatsuAdjusting the Seat Positions
■
Changing the Second and Third Row Center Seat Head
Restraint Position
*
■
Removing and Reinstalling the Head Restraints
Except third row outer seat head restraints
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Models with a release button
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
Models with two release buttons
Pull the restraint up as far as it will go. Then push the release buttons which are
located on the both legs at the same time, and pull the restraint up and out.
* Not available on all models
180
*
A passenger sitting in the second and third
row center seating position should adjust the
height of their head restraint to an
appropriate position before the vehicle begins
moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release
button(s).
1Removing and Reinstalling the Head Restraints
WARNING
3
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.