Download Print this page

Specification; Troubleshooting - PRESSURE KING PRO SC-40S User Manual

Advertisement

Specification

Power supply
Power
Net weight
Dimensions

Troubleshooting

Lid does not close properly.
Check inner lid and gasket seal are correctly positioned
Lid is difficult to remove.
Float valve has not dropped. Ensure pressure has dropped to
normal.
Steam is released under the
Ensure the gasket seal is fitted correctly and not worn out.
lid during cooking.
Ensure all food residue is removed from the gasket.
The float valve does not rise.
Not enough food or water in the inner pot.
Ensure all food residue is removed from the valve.
Displays E1, E2, E3 or E4.
System error – unplug, and allow the pressure cooker to cool
down if applicable. Close the lid. If the problem persists after
re-plugging in, the appliance has developed a fault and
needs replacing.
10
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
220 – 240 V – 50/60 Hz
900 W
5 kgs
318mm x 318mm x 340mm
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
11

Advertisement

loading