Motorola MOTORAZR V3xx Quick Manual page 12

Pair (Link) My Headset
1
If you are using a different
headset than the Motorola H700
shown in this demo, refer to your
headset's Quick Start Guide for
instructions on how to put the
headset into pairing mode.
Press the centre key, then select
Settings
Connection
Bluetooth Link
Setup
2
Power is highlighted. Scroll
right to turn the power to On.
Tip: To extend battery life, use
this procedure to turn your
phone's Bluetooth feature off
when you are not using
a headset.
3
Now that you have turned on the
Bluetooth feature, you must pair
(link) the headset with
your phone.
After you have successfully
paired your headset and phone
for the first time, you do not need
to repeat this pairing procedure.
Press and hold the Call button
on the headset until the light
turns on and remains steadily lit.
If the light is flashing or does not
remain steadily lit, make sure
the headset is fully charged and
repeat this step.
4
Immediately open the folding
microphone. The light should
remain steadily lit.
Note: If you are not using the
Motorola H700 headset, this step
may not apply.
MOTORAZR
™
V3xx
5
On your phone, press Back and
select Add Audio Device.
6
Select the headset.
Once you see the Connected
message, your phone and
headset are successfully paired
and ready to use.
When pairing is successful,
the headset light changes from
steadily lit to flashing and the
Bluetooth icon appears in the
top status bar.