Learn To Ride; Operation Procedure - NEVA BOARD GLIDE HAPPY User Manual

It is important to learn and remember the related safety instructions before riding the Neva
Board for the first time.

5.1 Operation Procedure

Step 1: Start the board by pressing the power button.
Step 2: Prepare to ride by placing the board on FLAT ground. Put one foot on the pad, which
will trigger the pressure plate and turn on the indicator light, after which the system enters the
self-balancing mode. Then taking care place the other foot on the pad.
Step 3: After standing successfully, keep your balance and centre of gravity by keeping
stationary. Only take small forward or backward movements through the body to start.
Step 4: Control and Turning - Lean your body and the board will turn to the left or right.
Step 5: To dismount keep the board still, step one foot down, then the other foot to leave the
mat quickly.
Increased pressure on the right
foot plate will move the board
forward by turning left
USER MANUAL

5. LEARN TO RIDE

Increased pressure on the left
foot plate will move the board
forward by turning right
IMPORTANT
If user stands on the board incorrectly
the buzzer will alarm and warning
indicator will light up. Please step off
and start again so that the system can
enter self-balancing status.
08