Battery; Battery Power; Charging Process - NEVA BOARD GLIDE HAPPY User Manual

Table of Contents

Advertisement

This section provides safety knowledge, tips and cautionary statements, letting you learn about safety
precautions before using the self-balancing board. To ensure that you can safely ride the self-balancing board
be sure to read product manuals and comply with the relevant safety instructions. Please note all the warnings and
cautions that are mentioned in the product manuals will improve your enjoyment, safety and experience of using your
Neva Board.

7.1 Battery Power

You must stop riding the board when the displays shows low
power (red LED light) or it may affect battery lifetime and
cause on-going problems. Don't use the battery if the
following occur:
• Emits an odour or overheats.
• Don't touch any leaking materials.
• Children and animals are forbidden to touch the battery.
• Make sure the air vent fan of the battery is left UNCOVERED.
• The charger must be taken out before installing or riding the
Neva Board.
• Battery contains dangerous substances therefore do not
open the battery and do not insert anything into the battery.
• ONLY use the charger provided with your product .
• Don't charge the battery that has over discharged.
• It should be abandoned for safety.
USER MANUAL

7. BATTERY

7.2 Charging Process

• Ensure charging port is dry.
• Open the charging port.
• Plug the charging cable into the board making sure
the green indicator light lights up, then connect the
cable with the power supply (100V - 240V; 50, 60 Hz).
•The red light on the battery (transformer) indicates it
has begun to charge, otherwise check whether the
cable is connected.
• When the indicator light changes from red to green
the power is fully charged. At this point stop charging
as over-charging will affect lifetime performance.
• The charging time is approx. 2-3 hours.
11

Advertisement

Table of Contents
loading

Table of Contents