Overspeed Warning; 4Wd System Warning Light; 4Wd Lock Indicator; Overspeed Warning Light - Hyundai Tucson 2013 Owner's Manual

Hide thumbs Also See for Tucson 2013:
Table of Contents

Advertisement

Features of your vehicle

Overspeed warning

(if equipped)

Overspeed warning light

If you drive with the speed of 120 km/h or
more, the overspeed warning light will
blink. This is to prevent you from driving
your vehicle with overspeed.
Overspeed warning chime
If you drive with the speed of 120 km/h or
more, the overspeed warning chime will
sound for about 5 seconds. This is to pre-
vent you from driving your vehicle with
overspeed.
4
60

4WD system warning light

120
(if equipped)
km/h
When the ignition switch is turned to the
ON position, the 4WD indicator will illumi-
nate and then go off in a few seconds.
If the 4WD system warning light
illuminates, this indicates that there is a
malfunction in the 4WD system. If this
occurs, have your vehicle checked by an
authorized HYUNDAI dealer as soon as
possible.

4WD LOCK indicator

(if equipped)
The 4WD LOCK indicator light is illumi-
nated when the 4WD LOCK button is
pushed. The purpose of this 4WD LOCK
mode is to increase the drive power
when driving on wet pavement, snow-
covered roads and/or off-road. The 4WD
LOCK indicator light is turned off by
pushing the button again.
CAUTION
Do not use 4WD LOCK mode on dry
paved roads or highway, it can
cause noise, vibration or damage of
4WD related parts.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents