Bissell 1941 Series User Manual page 18

Maintenance: Replace the Brush & Belt
1
Unplug vacuum, turn over and
unscrew 9 Silver Phillips head
screws to remove bottom
cover.
4
1. Place belt back on brush roll.
2. Pinch belt around brush roll
& hook back around the silver
motor gear.
NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum
off and unplug from electrical outlet. Remove obstruction and brush will
automatically reset when vacuum is plugged and turned back on.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
16
www.BISSELL.com
2
Pull roller straight out
and slide belt off motor
gear. Replace roller and/
or belt.
3. Rotate brush roll into place
and line up end caps.
4. Re-attach bottom cover
with 9 screws.
3
1. Inspect brush roll by
placing it on its end and
spin. The brush roll should
spin freely, multiple times
by one flick. If it doesn't,
replace brush roll.
2. Inspect belt, replace if it
appears damaged.