Bissell 1941 Series User Manual page 10

Operations: Tool Caddy Options
Operations: Getting Started
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
NOTE: Be sure the green suction knob on side of vacuum is turned to
"Floor Suction" before use.
1
Step gently on base and pull back on
handle to recline.
Turn Height
3
Adjustment Knob
to desired carpet
cleaning level.
8
www.BISSELL.com
SINGLE
TOOL CADDY
You have the option to store just the
LED Lighted Crevice Tool or both
that and the Pet TurboEraser Tool.
OR
Pick the single tool caddy or double
tool caddy and push hard to slide it
on the base of vacuum.
DOUBLE
TOOL CADDY
2
Turn vacuum on by pressing Power Switch on
(I - ON and O - OFF). Press Brush roll switch to
run the PowerBrush for carpet cleaning (brush
roll is on when light on switch is illuminated).
See page 15 to maintain the brush roll.
NOTE: The brush roll will automatically shut off
when vacuum is locked in upright position,
recline to reactivate.
NOTE: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your vacuum is difficult
to push, adjust to the next higher setting.
NOTE:
wrapped around your brush roll, run vacuum
back and forth on clean carpet several times.
This will help release any wrapped hair.
Power
On/O
Switch
In the unlikely event that hair
Brushroll
On/O
Switch