Syntax
id [<enclosureID>]
Parameters
<enclosureID>
Optional, set enclosure id number. The enclosure ID is a number ranges from 1 to 15.
Example
Set the system's enclosure ID number to 3.
CLI > id
The system's enclosure ID is 1
CLI > id 5
Set the system's enclosure ID number to 5
CLI > id
The system's enclosure ID is 5
2.3.
Storage Management
This section includes the following command sets.
port: Show the status and WWN of SAS ports
disk: Show disk drive information
zone: Show zone settings or set zone configuration
2.3.1. Show SAS Port Information (port)
Command
port
Description
Show the information of host ports in the system.
Syntax
CLI Command Sets
13