Set Password (Setpwd); Assign An Enclosure Id (Id) - Qsan XCubeDAS XD5324D User Manual

2.2.3. Set Password (setpwd)

Command
setpwd
Description
Change password and overwrite the previous one.
Syntax
setpwd <password>
Parameters
<password>
New password to access the system, factory default is 1234. The maximum length of the
password is 16 characters. Valid characters are [ A~Z | a~z | 0~9 | ~!@#$%^&*_-
+=`|\(){}[]:;"'<>,.?/ ].
Example
CLI > setpwd
Current password is 1234
CLI > setpwd QSANadmin
The new password is set to QSANadmin
CLI > setpwd
Current password is QSANadmin

2.2.4. Assign an Enclosure ID (id)

Command
id
Description
Assign an enclosure ID number to the system for management.
12 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.