Advertisement
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical outlet
before performing any procedure in this section.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFORE EAcH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
cleaning
AFTER USE:
a. Wear ANSI-approved safety goggles and
NIOSH-approved breathing protection, blow
debris from Planer using dry compressed air
Item 63445
For technical questions, please call 1-888-866-5797.
2. pERIODIcALLy, wear ANSI-approved
safety goggles and NIOSH-approved
breathing protection and blow dust out of
the motor vents using dry compressed air.
3.
WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.
b. Remove resin residue with
pitch and gum remover.
c. Empty dust collection system.
d. Wipe external surfaces with clean cloth.
e. Wax tables.
Page 11
Hide quick links:
Advertisement
