Requirements; General Requirements; Power Cord Set Requirements - FIC spectra User Manual

Spectra User's Guide

Requirements

General Requirements

1.
2.
3.
4.
5.

Power Cord Set Requirements

The power cord set (appliance coupler, flexible cord, and
wall plug) you received with the computer meets the
requirements for use in the country where you purchased
the equipment.
Power cord sets for use in other counties must meet the
requirements of the country where you use the computer.
For more information on power cord set requirement,
contact your local authorized dealer, reseller, or service
provider.
6
6
Introduction
The requirements listed below are applicable to
all countries:
The length of the power cord set must be at least
6.0 feet (1.8 m) and a maximum of 14.76 feet
(4.5 m).
All power cord sets must be approved by an
acceptable accredited agency responsible for
evaluation in the country where the power cord
set will be used.
The power cord set must have a minimum
current capacity of 10A and a normal voltage
rating of 125 or 250 volts AC, as required by
each country's power system.
The appliance coupler must meet the
mechanical configuration of an EN 60320. / IEC
320 Standard Sheet C13 connector, for mating
the appliance inlet on the computer.