Operation - Pyle PVR300 Instruction Manual

Operation

It'll turn to Setting mode automatically without any key
pressed after 3mins, and then it'll turn off without any
key pressed after 10mins..
(refer to page 9 for detailed setting of Setting mode)
Select a file folder
There are three memory storage areas(file folder) labeled A,B,C in the unit for your
choice, it can store 999 files in each file folder, so it can store 2997 in all. Absolutely, it
must be subject to its memory capacity .
As the right photo, it shows the file folder and other
detailed infos. of this recording file on LCD.
Note
If the memory is full, " FULL" will appear on the LCD, so
delete or remove files, or replace a new Micro SD card
as storage.
Preparing for recording
Before recording, you can set the VOR function according as your demand. If it is turned
on and the detected volume doesn't reach the VOR level value(set by system), the
recording will pause until it detects eligible volume, otherwise it will continue recording
soundless section in this file(refer to page 8 for VOR setting) .
At voice mode, you may select a desired file folder by
File/A-B key.
And you may set VOR function in advance.
* For more recording settings, just refer to page 8.
* The first several minutes sound may not be recorded, it's
just for activating the recorder .