Basic Operation; Battery Indicators - Pyle PVR300 Instruction Manual

Basic operation

It will never affect files stored in the unit to recharge the built-in Polymer battery(4 hours),
If you shut down the unit with normal operation, it will keep the date and time by last setting.
Press down and push the USB plug switch to open the USB plug.
Connect this unit to the USB interface for battery charging or computer connection.
(refer to Page 10)

BATTERY INDICATORS:

* The battery are fresh.
* The battery are exhausted, and need to be charging.
Inserting and removing the Card
This unit is with built-in 4GB flash memory, and
you may add a Micro SD card for extending
memory. (128MB~8GB Micro SD card)
Insert the Micro SD card into the slot till it ticks,
then you may select this Micro SD card as the
storage medium of recording files.
(refer to page 8)
To turn on/off the unit
Push the Power key up to open the unit, it will turn to
Voice mode.
Push the Power key down to power off this unit，then
the LCD goes out, and the unit is turned off.
* You may press and hold PLAY/PAUSE key more than
3secs. to turn it on/off while the Power key is at up
position.