Auto Standby; Apply Factory Settings - Philips CSS2133B User Manual

1
Bluetooth on the remote control
Press
to switch the SoundBar to Bluetooth
mode.
Bluetooth indicator blinks.
» The
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
CSS2133B to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, the
indicator blinks.
3
Wait until you hear a beep sound from the
SoundBar.
» When the Bluetooth connection
succeeds, and the
indicator lights up.
» If the connection fails, the
indicator blinks continually.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your SoundBar with another
Bluetooth device, press and hold
remote control to disconnect the currently connected
Bluetooth device.
•
Philips does not guarantee 100% compatibility with all
Bluetooth devices.
EN
10
Bluetooth
Bluetooth
Bluetooth
Bluetooth on the

Auto standby

When playing media from a connected device,
the SoundBar automatically switches to standby
if:
• no source button is pressed for 30 minutes,
and
• no audio playback is detected from a
connected device.

Apply factory settings

You can reset your SoundBar to the default
settings programmed at the factory.
1
Press BASS+, VOL-, and Treble+ within
three seconds.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.