Powerhorse M1181A.1 Owner's Manual

Powerhorse log splitter fender kit

Specifications

Owner's Manual

M1181A.1

Powerhorse Log Splitter Fender Kit

The manufacturer reserves the right to make improvements in design and/or

changes in specifications at any time without incurring any obligation to install

them on units previously sold.

Any Questions, Comments, Problems or Parts Orders

Call Powerhorse Product Support 1-866-443-2576

Manufactured by

Northern Tool + Equipment Co.,

2800 SouthCross Drive West

P.O. Box 1499 Burnsville, MN 55337-0499

Table of Contents

Need help?

Do you have a question about the M1181A.1 and is the answer not in the manual?

Page 1 Specifications Owner’s Manual M1181A.1 Powerhorse Log Splitter Fender Kit The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. Any Questions, Comments, Problems or Parts Orders...
Page 2 Summary of Important Safety Information for Operation WARNING Carefully read and make sure you understand the following safety information before installing this fender kit and your original log splitter owner’s manual. Prohibition Against Modifications Never modify or alter the log splitter in any way. Modifications can create serious safety hazards and will void the warranty.
Page 3 Assembly Instructions Closely inspect all log splitter components. If you have missing or damaged components, please contact Powerhorse Product Support at 1-866-443-2576. Step 1 – Attaching Right Fender Tools Needed  Install the Right Fender (Part Number 790637) to the Log Splitter ...
Page 4 Assembly Instructions Step 2 – Attaching Left Fender Tools Needed  Install the Left Fender (Part Number 791080) to the Log Splitter Axle.  13mm Wrench  Use (2) M8-1.25 Flange Bolts, (2), M8 Flat Washers, and (2) M8-1.25 Nyloc Nuts. ...