Safety Precautions - Pyle PSCNPHO32 Instruction Manual

Safety precautions

:
Important Do not expose this product to rain or moisture to preserve the life of your
product.
:
Caution Do not disassemble this unit. To prevent the risk of electric shock, do not
remove cover.
:
Ventilation The device should be situated so that its location or position does not
interfere with its proper ventilation. For example, the unit should not be
situated on a bed, sofa, rug or similar surface that may block the
ventilation openings.
:
Heat The device should be situated away from sources of high heat such as
radiators or stoves.
:
Cleaning We strongly suggest using a clean, dry, non-alcohol cotton swab to clean
:
Non use period The USB cord for the device should be unplugged from the computer
:
USB overloading
:
Servicing The user should not attempt to service the device beyond those means
Film Holder: The design of the film holder follows ISO standard. In some cases the holes
on the film will not match exactly to the alignment of the holder. This is caused by a
non-standard camera. In this case there will be a small black line on the edge of the frame
that can easily be cropped out using photo editing software.
ISO-- International Organization for Standardization
For environmental protection and energy conservation, besides in PLAYBACK and USB
mode, the device will be powered off automatically without any operation in 30 minutes of
inactivity.
the glass surface periodically to produce a clear image.
when the unit is left unused for a long period of time.
Do not overload the USB connections on your computer. If you have
too many devices connected to your computer such as a wireless
mouse, media player, mobile phone or other USB powered devices.
There may not be enough power for the film & photo scanner to
operate properly.
described in the operating instructions. All other servicing should
be referred to qualified person.
2