Samsung B2700 Service Manual page 31

Exploded View and Parts List
5
Guide RIB
Torch Light
< Figure 1 >
1) Attach Torch Light which is removed a cover
of adhesive tape on encloser.[Figure 1]
2) Insert 2PIN Connector of Encloser into
connector.[Figure 2]
※ caution
1) GUIDE RIB 2POINT 에 맞춰서 안착한다 .
2) Be careful of the polarity of 2PIN CONNCETOR.
7
Dome Sheet
< Figure 1 >
1) Attach the DOME SHEET following the
wall.[Figure 1]
2) Attach electric conduction tape(1EA) on rear side
of BRACKET. [Figure 2]
※ caution
1) Be careful of the position electric conduction
tape.
This Document can not be used without Samsung's authorization
Encloser 2PIN
CONNECTOR
< Figure 2 >
Electric conduction tape
< Figure 2 >
SAMSUNG Proprietary-Contents may change without notice
6
MIC
< Figure 1 >
1) Insert the MIC of KEY PBA into the hole of
KEY BRACKET.[Figure 1]
2) Insert KEY CONNECTOR into KEY BRACKET
hole.[Figure 2]
※ caution
1) Mind the order of assembly.
8
KEY PAD
< Figure 1 >
1) Assemble KEY PAD to KEY BRACKET.
[Figure 1 ]
2) Firstly,Insert MIC into the MIC rib of FRONT.
[Figure 2 ]
※ caution
1) Be careful not to make a mistake.
7-5
KEY CONNECTOR
< Figure 2 >
MIC
KEY PAD
ASSY
FRONT
< Figure 2 >