Disassembly And Assembly Instructions - Samsung B2700 Service Manual

7. Disassembly and Assembly Instructions

7-1. Disassembly
1
SCREW
CAP
< Figure 1 >
1) Remove left and right SCREW CAP by using
tweezers.[Figure 1]
2) Disjoint left and right screws that are each one
point.[Figure 2]
※ caution
1) When disjoint screws, be careful not to make a
scratch of the case.
3
< Figure 1 >
T o rq ue :1.1 Kg F
S i ze: 1 .4*5 .0
1) Disjoint rear screws that are 6 points.[Figure 1]
2) Disassemble rear case from front by lifting it at
the top of rear case.[Figure 2]
S c re w
T orqu e :1 .1K gF
Size :1.4 *3.0
< Figure 2 >
< Figure 2 >
S c r e w
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
< Figure 1 >
1) Make the gap between SIDE DECO and SET
by disassemble tool.[Figure 1]
2) Twist a SIDE DECO to left, right for detaching
from the set.[Figure 2]
※ caution
1) Be careful not to get a damage of the case
4
VGA CAMERA
CONNECTOR
< Figure 1 >
1) Disassemble VGA CAMERA CONNECTOR by
tweezers.[Figure 1]
2) Disassemble KEY PBA CONNECTOR by tweezers.
[Figure 2]
※ caution
1) Be careful not to get a damage of the FPCB
7-1
< Figure 2 >
KEY PBA
CONNECTOR
< Figure 2 >