Attention to the model PXR-H
There is a check mark on the label of the model PXR-H.
When replacing PXR-H viscometer, be sure to use the viscometer with label on which
check mark is applied to the corresponding coefficient. And once replaced,
corresponding coefficient must be input from the screen. Change the value following
the procedure of "2.6.2 Confirmation of Viscometer coefficient".
Explanation of the viscometer label
In this example, viscometer
coefficient is 1413.
Check mark for
corresponding
coefficient
In-factory code No.
Viscometer No.
4-19
Viscosity
coefficient