McIntosh C200 Owner's Manual page 17

LIS PROCESSOR
push-button turns
the Listen Processor
loop On or Off
BALANCE control
allows the adjustment
of the relative volume
levels for each channel
and is used for setup
functions
IR Sensor for REC MONITOR
Remote Con- push-button
trol Operation switches the
RECORD Output
signals to the Listen
circuit so the Pro-
gram Signals sent to
the Record outputs
are audible
REC PROCESSOR
push-button turns the
Record Processor
loop On or Off
C200C Front Panel Controls, Displays, Push-Buttons, and Switches
DISPLAY indicates the Listen and
Record Sources, Listening Volume
Level and Setup Functions
RECORD switch selects
the program signals that
are available to record
from and is used for setup
functions
SETUP allows the
changing of the
default settings for
Inputs, Levels and
the Display
MONO push-button
combines left and
right stereo signals to
mono at all Main,
Amplifier and Listen
Outputs
STANDBY/ON push-button
turns the C200 On, or Off
(Standby)
LISTEN switch selects
the program signals
that are listened to and
unbalanced outputs
MUTE push-button
mutes audio in all
Listen Outputs
DISPLAY push-button
switches the display to
indicate either volume
level in dB, or percent of
maximum volume
VOLUME control
adjusts the listening
volume level and is
used for setup func-
tions
POWER
switch turns
all AC power
completely On
or Off
OUTPUTS 1 and 2 push-buttons
allow the C200 to switch Power
Control and Audio to two sepa-
rate stereo power amplifiers
17